Available Materials
Featured Products
NEWS
Short Description:
Refractory 26 is Fe – Ni – Co – Cr based high temperature resistant, corrosion resistant alloy. It has excellent relaxation and creep resistance, and good plasticity under medium tem-perature.
Product Description
Alloy R26 is Fe – NI – Co – Cr precipitation hardening type deformation of high temperature alloy, long-term use of C – 570 °C temperature range of 540 °C, the highest temperature can reach 677 C, add element of a Cr, mo alloy solid solution strengthening, high to low titanium, aluminum form y aging strengthening phase, while drilling elements made of titanium, aluminum solubility in the solid solution is reduced, prompted y phase precipitation amount increase, so as to improvel the thermal stability of y, reduce y ‘phase of the stacking fault energy. The composite properties of the alloy are superior, with excellent tensile resistance, force relaxation and creep resistance, no notch sensitivity.
Alloy R26 Characteristic
The composite properties of the alloy are superior, with excellent tensile resistance, force relaxation and creep resistance, no notch sensitivity
Alloy R26 Chemical Composition
Alloy R26 Physical Properties
| Density | Melting range |
|---|---|
| 9.14g/cm³ | 1300-1330°C |
Alloy R26 Mechanical Properties (RT, Solution Annealed)
| Tensile Strength (σb/MPa) | Yield Strength (σp0.2/MPa) | Elongation (σ5/%) |
|---|---|---|
| 1000 | 550 | 15 |
- Bars & Rods & Foring Ring /Flanges
- Sheet & Plate
- Strip & Coil
- Welding Wire &Spring wire
- Seamless Tube & Welded Pipe
»Round Bar & Square Bar & Hexagon Bar
● Diameter : φ8～φ300mm Length:10mm-6000mm
● Hot forging, Hot Rolling, Cold Drawing
● Bright Surface, Polished Surface, Black Surface
»Tube & Pipe:Seamless Tube& Welded Pipe
● Cold Drawing Seamless Pipe： φ1.0～φ220mm
● Hot Extrusion pipe: φ50～φ250mm
● Others : U Blend Tube and Elbow
»Hot Rolled Plate & Cold Rolled Sheet
● Cold Rolling Sheet Thickness: ≦2.0mm Width:≦1500m
● Hot rolling Plate Thickness: ≧4.0mm Width: ≦2500m
»Strip & Tape Ribbon
● Thickness: ≧ 0.01mm Width: 15mm-300mm
● Cold rolling BA Strip, Hard & Soft Condition
»Straight Length Wire & Spool Wire
● Welding Wire: φ 0.1mm～6.0mm Cut length Rod: φ1.0～φ8.0mm
● Package : 5-25kg/Spool or Box
Alloy R26 ApplicationsI
- Fasteners for steam turbines
- Bolt
- Air seal spring sheet
- Sealing ring
- Pin